18" - 5x8mm Antique Brass Metal Chain
Cut two (2) 24" pieces of Soft Flex wire (I like mine long for ease when crimping my ends). Starting with your first strand, put your crimp tube and wire guardian on and crimp with your pliers, then put on the crimp cover bead. Now start stringing your beads on the wire as shown in photographs (or in your own pattern). The longer strand of the necklace starts with a glass spindle bead, a 4mm daisy spacer, a 6mm fire polished bead, another 4mm daisy spacer, and then back to the glass spindle bead. Once all beads have been strung onto the wire, finish the other end with a crimp tube, wire guardian and crimp cover bead.
The 2nd strand will be started and finished just as the first, but start with 2 6mm fire polished beads, a 4mm daisy spacer, a glass spindle bead, and so on.
Once both strands have been strung and the ends are finished, connect them to the TierraCast hammered oval link with the 5mm jump rings.
Use the 7mm jump rings to connect the oval link to the antique bronze chain. I used 18" in my design as I like a longer necklace, but you can use less or more to make your own desired length.